|
Lumber Edge Gluing & Laminating
Batch Type Lumber Edge Gluer/Laminator
Features
- Presses Utilize a Heavy Duty Box Frame Design for Maximum Rigidity, RF Shielding and Operator Safety
- Electrode Plates are Fabricated from 1/2" Aluminum Plate to Resist Warping and Damage from Arcs. Plates are Isolated from the frame by Structural Fiberglass Standoff Blocks for Long Life
- Electrode Plates are Equipped with Slide-on Polyethylene Covers Easily Removed for Cleaning or Repair
- Feed-thru Conveyor is Constructed of Non-conductive Chains and flights. Conveyor Drive Includes Soft Start to Prevent Jerking the Lumber Load
- Optional Automatic Pre-layup Systems
- RF Generator is Mounted on Casters Alongside the Press for Easy Service
- Automatic Load Control and Automatic Frequency Control are Standard
|
|
Continuous Type Lumber Edge Gluer
Features
- Continuous Crossflow or Linear Flow Models Available
- Rigid Frame Construction Provides a Firm Base for Precise Steering Control
- Caterpillar Tractors Provide Drive and Retard Forces. Large Contact Area on Wood Provides Maximum Traction without Using Cleated Surfaces which can Mark Softwoods
- Electrode Plates are Equipped with Slide-on Polyethylene Cover Easily Removed for Cleaning or Repair
- Optional Automatic Infeed Layup
- RF Generator Mounted on Casters Alongside Press for Easy Service
- Automatic Frequency Control is Standard
|
Pre-layup Systems
Features
- Reduces Manpower Requirements and Back Injuries. Increases Production by Providing Non-stop Glue Application and Layup, even while the Press is Being Loaded
- Several Designs Available Including a Blockboard Pre-layup System
|
|
Cutoff Saws
Features
- Stationary and Traveling Models Available, Depending on the Application
- High Speed Saw Crossfeed on Continuous Model Provides for Short Cutoffs at High Production Rates
- Speed-up Conveyor after Saw Transfers Cutoff Panels to Next Process
|
Horizontal Roll Glue Applicators
Features
- Single Bottom Roll Applicator with Air Clutch Driven Infeed/Outfeed Conveyors. Design Allows for Glue and Doctors Rolls to Continue Running While the Conveyors are Stopped. Minimum Contact Lift Arm Raises Boards Off Glue Roll while Conveyors are Stopped
- Black Brothers Top and Bottom Roll Applicators with Coe Mann-Russell Infeed and Outfeed Conveyors. Model is Supplied When Adhesive Must be Applied to Both Sides of a Substrate
|
|
Vertical Head Glue Applicators
Features
- Apquip Glue Extruder System with Coe Mann-Russell Infeed and Outfeed Conveyors
- Applies Adhesive Only on a Demand Basis Providing for Minimum Waste and Clean-up Time
- Facilitates Feeding Stock to Edge Gluer Directly from the Jointer
|
Back to Top
|
